By far, the fastest growing category of vaporizers, and the most popular devices are Box Mods. This style of device is great for those who want more power and control, and when you purchase a regulated mod, these devices are quite safe as well.
A box mod is going to give you maximum control over your vapor production. Box mods are the top of the vaping food chain. They are somewhat similar to the tube style vaporizers that we talked about in the starter kits section, but they have more of a box style housing for the battery. This style of vaporizer is steadily becoming more popular, and there is really no need to feel intimidated by them- as all of the recommendations I’ve made below are very easy to use and you’ll be vaping very quickly right out of the box.
One other great benefit of this style of mod is that many companies are now offering free software upgrades, which will greatly extend the life of your mod as you no longer have to go out and buy a new mod when the software becomes outdated.
Let’s take a look at Best Vape Info’s recommended best box mods of 2016:
The Hotcig DX200 is this company’s first try at a DNA200 mod, and it is one of the highest quality DNA200 devices available. It comes with a 900 mAh LiPo pack that can be swapped with a higher capacity pack if you like. It also comes with a spring loaded 510 connector.
This is a nice small device with a great hand feel. It has a very premium look as well as a high build quality. This device has possibly some of the best temperature control you can experience vaping, due to the preheat feature. This gives your coil extra power until it’s heated up to the selected temperature. You have full control over customizing this through escribe. What this means for you, is that you will be way less likely to overheat or burn your juice. You have to experience this to get a true sense of the benefit. This is one mod I highly recommend.
Once again, one of the best companies in the industry has done it again with a fantastic device. The Reactor box mod kit comes with everything you need to get started. This device comes with a 4,400 mAh battery with adjustable wattage and voltage and an LED screen. The tank holds 5 ml of E-liquid and houses a .5 sub-ohm dual-coil head.
Each kit also includes a wide-bore glass and stainless steel mouthpiece, a USB cable and a wall adapter.
This is a really great device that fits perfectly in your hand and is extremely easy to use. Both the voltage and the wattage are adjustable, which means you get a vape which is truly customized to you.
This mod comes in four different colours and the battery charger has a pass through feature, so you can vape while it’s charging. This is a great mod at a great price.
The name of this md (Reuleaux) comes from the ‘center most‘ triangle created when three circles intersect. Everything in this mod is represented in sets of 3. You get 3 18650 batteries, the mod is a 3 piece design and this mod was created by JayBo Designs, Wismec and Evolv.
This is the very firs mod to use 3 removable 18650 batteries which output 200 watts of power. These 3 batteries provide a total of 11.1 volts. This is one of the most powerful devices you can buy. For those of you who are looking for huge, thick clouds, this is definitely the device for you. You have to see it to believe it!
This is JoyeTech’s first 150W mod. The Cuboid is a variable temperature controlled system that’s powered by 2 replaceable 18650 batteries. The batteries are super easy to change, simply remove the slip open cover. The LED screen is huge at 0.96 inches and it will allow you to easily review all of the important settings.
The Cuboid accepts many different types of wires including titanium, nickel and stainless steel. You can easily adjust values for different materials, which will get you really accurate temperature control and ensure that you always get consistent flavour.
Charging and upgrading software is done easily with a micro USB port.
Overall, this is an excellent device, at an unbeatable price. At less than $40 you should run out and get yourself one right away.
If you are looking for the latest vaping technology, the KBOX 200 just may be what you are looking for.
This mod features a USA-made TI Infineon stability chip, 360kHz high-speed synchronous DC-DC control mod, a wide range of safety protections, and advanced temperature control to give you amazing flavour.
This device can fire up to 200W, with temperature control and can take on Stainless Steel, Nichrome, Nickel, and Titanium wire. The design is simple and functional and it’s a great size. There’s an OLED display on the front, USB port for upgrading and charging, as well as 2 small buttons for adjustments.
Pioneer4You has just released the all new iPV D3 device, which is the latest and greatest in this lineup. This device has a billet aluminum body and temperature control, as well as a single 18650 battery with a magnetic battery door for easy access. For the chip, it uses the YiHi SX150 H chip and has a 510 spring-loaded center pin to allow it to connect with any atomizer.
Unlike the previous D2, the D3 includes voltage step down, which allows for lower wattage vaping. The other great benefit is a longer battery life. This is a very powerful device that allows you to fire up to 80 watts, offers up to 50 joules in temp control mode and lets you range from 200F to 572F.
This device has everything you need, and at around $60 you can’t beat the value.
This is a device that has gotten a lot of buzz. This vaporizer will give you lots of power, the very latest technology, and it just happens to look great too.
This is a really beautiful design, with stainless steel used throughout the entire device. The side panels are a black glass which really makes it look high end.
While this mod is very simple aesthetically and also simple to use, it doesn’t lack in performance. it comes with 200w of vaping power, and it can fire at as low as 0.05 ohm. The temp control feature will prevent dry hits while stretching your e-liquid consumption. This device has a range of 212 to 662F which really allows you to customize your experience. It really doesn’t get much better than this.
The Vox TC allows you to find at wattage or temperature that works for you, and once you’ve set it, you can forget about it. No matter what kind of atomizer or tank you use, the device will adjust the power to match. If you’re new to temperature control devices, it may take you a few tries to get the right wattage, but it’s really easy- just use the two buttons marked + and – in 0.1 watt increments.
The TC can save up to 5 settings, which will allow you to experiment with different e-liquids. It comes with comes with one powerful high-quality 18650 battery, which is very convenient (often with mods that have external batteries, you’ll need to buy them separately.)
This device can produce massive clouds of vapour, and it has a very high end look to it. I would have ranked this device higher on the list- the only negative I found is with the battery life. If you are a heavy vaper, it’s unlikely that you’ll get a full day from this device. Charging is very easy (there is a USB port located under the device, or you can remove the battery and use an external charger.) If you use the USB, the device supports pass-through, which means you can vape while it’s charging- a definite benefit or some of us.
This is one of the best devices out there for performance. This vaporizer comes from a long line of iStick devices. This device is exceptionally powerful and delivers huge clouds. The iStick can fire atomizers as low as 0.15 ohm and offers the very latest temp control features.
This device features a sturdy magnetic battery panel which allows you to easily access the dual battery bay for your 18650 batteries. The coolest thing about this device is the option to upgrade the firmware and switch between a variety of TC modes (Ni/Ti/SS/TCR) or VW, Bypass modes. The V1.10 update will allow you update the device to 120W max output. Buying a device from a company that offers firmware updates means that you won’t have to worry about your device becoming outdated as fast, protecting your investment.
This is a very ergonomically designed device and it includes a hidden trigger button, giving you better grip. Overall, this is a fantastic device that I highly recommend.
The Invader III is a killer simple mod that balances power, aesthetics and ergonomics. This device is capable of generating 240 watts with a resistance as low as 0.1.
There are three finishes available- blue, black and silver. This device uses two 18650 batteries and a proprietary chipset that produces high power ad protects against short circuits and reverse connections.
There is no display with this device, but it is dead simple to use and you will find that you don’t really miss the display! For those of you who are looking for something rugged and simple, yet powerful and reliable, this is the device for you. And this device definitely looks like it costs more than it does. At less than $35, this mod wins the prize for best value on this list.
Best Vape info was started by a long time smoker who found vaping and was finally able to quit smoking for good. I'm passionate about sharing our knowledge and hope this site can help you quit smoking for good too.